|
|
|
|
|
Aluminum is a
popular material choice in many industries for several reasons - it's high
strength yet lightweight, has excellent malleability, is easy to machine, has
good conductivity (both thermal and electrical) and has excellent corrosion
resistance. In addition, Aluminum is non-magnetic and is non-toxic. It's also
very easy to recycle.
Aluminum products can be found in most
industries. Aluminum Plate is created by passing aluminum between rolls under
pressure, it becomes thinner-and longer in the direction in which it is moving.
Aluminum can be flat-rolled and re-rolled until it reaches the desired
thickness or gauge. |
ICI Metals carries an
extensive line of aluminum plate including:
| • |
Grades include
6061-T651, 7075-T651, and Cast Aluminum Tool & Jig Plate. Other grades may
be available for mill orders |
| • |
Thicknesses
range from ¼" - 6" |
| • |
Dimensions
available are 60.5"-144.5" |
|
|
For more details about the
aluminum plates that we carry, please click on a category
below: |
|
|
|
6061-T651 Aluminum Alloy
|
Request Quote |
6061 is
a precipitation hardening aluminum alloy, containing magnesium and silicon as
its major alloying elements. It has good mechanical properties and exhibits
good weldability and good corrosion resistance. It is one of the most common
alloys of aluminum for general purpose use. T651 is solutionized,
stress-relieved stretched and artificially aged.
| Overview |
| Shape |
Plate |
| Grade |
6061-T651 |
| Tolerance |
commercial |
| Application |
Unlimited |
| Thicknesses Available |
¼" - 6" |
Technical Data:
| Chemistry |
| Silicon |
0.40/0.80 |
| Iron |
0.70(Max) |
| Copper |
0.15/0.40 |
| Manganese |
0.15 (Max) |
| Magnesium |
0.80/1.20 |
| Chromium |
0.04/0.35 |
| Zinc |
0.25(Max) |
| Titanium |
0.15(Max) |
| Others (Each) |
0.05(Max) |
| Others (Each) |
0.15(Max) |
| Aluminum |
Remainder |
|
| Medical Properties |
| Tensile Strength |
42(min)<4"; 40(min)>4" |
| Yield Strength(ksi) |
35(min) |
| Elongation in 2"(%min) |
250"-.499" 10% |
| |
250"-.499" 10% |
| |
1.001"-2.000" 8% |
| |
2.001"-4.000" 6% |
| |
4.001"-6.000" 6% |
|
PLEASE NOTE: All technical data is for comparison purposes only and
should not be used for design purposes. Please consult an engineer to discuss
specific recommendations regarding the appropriate metal for your project or
application.
back to top menu |
|
7075-T651 Aluminum Alloy
|
Request Quote |
7075 is
an aluminum alloy, with zinc as the primary alloying element. It is strong,
with a strength comparable to many steels, and has good fatigue strength and
average machinability, but has less resistance to corrosion than many other Al
alloys.
| Overview |
| Shape |
Plate |
| Grade |
7075-T651 |
| Tolerance |
commercial |
| Application |
aircraft and aerospace parts, bike frames, where high strength and
moderate toughness and corrosion resistance are required. |
Technical Data:
| Chemistry |
| Silicon |
0.40(Max) |
| Iron |
0.50(Max) |
| Copper |
1.20/2.00 |
| Manganese |
0.30 (Max) |
| Magnesium |
2.10/2.90 |
| Chromium |
0.18/0.28 |
| Zinc |
5.10/6.10 |
| Titanium |
0.20(Max) |
| Others (Each) |
0.05(Max) |
| Others (Each) |
0.15(Max) |
| Aluminum |
Remainder |
|
| Medical Properties |
| Tensile Strength |
250"-4.00" 78-67 |
| Yield Strength(ksi) |
250"-4.00" 67-54 |
| Elongation in 2"(%min) |
250"-.4.00" 9%-3% |
|
PLEASE NOTE: All technical data is for comparison purposes only and
should not be used for design purposes. Please consult an engineer to discuss
specific recommendations regarding the appropriate metal for your project or
application.
back to top menu |
|
Cast Aluminum Tool & Jig Plate
|
Request Quote |
Cast
Aluminum Tool & Jig Plate is produced from a fine-grain aluminum alloy
which is free from internal stress. Both surfaces machined to 25 micro-inches
or less PVC'D both sides. Good dimensional stability. Consistent mechanical
properties. Superior corrosion resistance. Also known by tradenames MIC-6 Cast,
K-100 Cast, G. AL® C250 and ALCA PLUS Cast.
| Overview |
| Shape |
Plate |
| Grade |
Cast Tool & Jig |
| Tolerance |
+/-.005 |
| Application |
assembly jigs and fixtures, welding fixtures, hydro press form
blocks, drill jigs, templates, vacuum chucks, index tables, printing machinery
components, automotive tooling, aircraft components, electronic components,
vacuum chambers, rubber and plastic molds, prototypes, medical instrumentation,
foundry patterns, food machinery components, packing machinery, CNC routing
tables, circuit printers |
| Thicknesses Available |
½" - 1" |
Technical Data:
| Chemistry |
| Silicon |
38,000 |
| Iron |
18,000 |
| Copper |
10 to 15% |
|
| Medical Properties |
| Tensile Strength (psi) |
38,000 |
| Yield Strength(psi) |
18,000 |
| Elongation |
10 to 15% |
|
GLEICH Aluminium Precision Cast Plate G. AL®
C250
Aluminum Alloy Plates, Precision Machined Plates
Developed for machine construction, jigs & fixtures, tools and
electronic industries applications with:
|
high
strength |
|
high
corrosion resistance |
|
improved
ductility |
|
improved
machinability |
For
details, see
Precision
Cast Plate G. AL® C250 Technical Data Sheet.pdf
PLEASE NOTE: All technical data is for comparison purposes
only and should not be used for design purposes. Please consult an engineer to
discuss specific recommendations regarding the appropriate metal for your
project or application.
back to top menu |
|
|
|
